Refurbishing process of rear axle

4/5 - (3 votes)

Below you will find a description of the rear axle refurbishing for Peugeot 106, Peugeot 206, Peugeot 306, Peugeot Partner, Citroen Berlingo, Citroen Xsara, Citroen Xsara Picasso, Renault Megane and Renault Scenic. This requires special tools and years of experience as well as knowledge of French vehicles. The whole process is divided into 9 phases.

Process of rear axle refurbishing Peugeot, Citroen, Renault

1) Dismantling of swing arms

Dismantling the swing arms from the rear axle base is done by special hydraulic pullers.


2) Removing the rear axle base (center part)

Special hydraulic table pulls out pins.


3) Sandblasting

We clean all parts from rust with sandblasting.


4) Trailing arm refurbished

The bearing seat is remachined first and we check geometry then.


5) Painting

Painting helps prevent corrosion of parts


6) Bearing assembly

The bearings will be mounted with a special press, without hitting.


7) Assembly of the axle base

Hydraulic press fitting prevents deformation of the beams


8) Checking the axle base (central part)

The geometry of the beam base is checked

Checking the axle base (central part)


9) Mounting of torsion bars

In the final phase, torsion bars are mounted.